Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
13. Re-attach insert brackets with previously
removed screws to secure insert (M).
Assembly is now complete. With the help of
another person, move the assembly to the final
desired location. Once in final position you may
plug the insert (M) into the power outlet.
CHANGE DOOR PANELS
Note: The pre-installed glass door panels can be switched out with the included wood door panels (L).
1. Remove the silicone trim along the outer edges of the glass panel on the inside of the door. Start
at a corner and pull to remove the four pieces. Be careful not to damage the silicone trim as it will
be used to secure the new panel.
2. Remove the glass panel from the door frame, then insert the included wood door panel (L).
Using your finger press the silicone trim back into place. Move around the outer edge of the panels
until all four sides are secure.
1
2
1
4
2
All manuals and user guides at all-guidesbox.com
(CONT'D)
(OPTIONAL)
1
2
3
13
1
1
2
3
L
11
1
M
2
3
1
4
Publicité
