Helo RA 18 Manuel Produit page 21

User and installation manual RA 18
Control panel RA 18:
OK
OK
All manuals and user guides at all-guides.com
Sauna room light control (On / Off)
Temperature display
- Desired temperature (Setting mode)
- Actual temperature (Operating mode)
Time display
- Preset time (Setting mode)
- Desired bath time (Setting mode)
- Remaining bath time (Operating mode)
- Remaining preset time (Preset mode)
-
Increase setting
Approve changes in settings / start heater
Decrease setting
Control panel activation / deactivation (On / Off – button)
On / Off – button:
Starts and stops functions.
When the equipment is active, pressing this button will stop all functions and display will turn off.
When button is pressed when the equipment is in passive mode (display off), it will activate the
control.
OK – button:
Approves changes in settings or moves to the next setting depending on function mode.
Plus – button:
Increase setting
Minus – button:
Decrease setting
Light – button:
Activates a relay on the circuit board. Electrical connectors for lighting are marked with a N and a
light-symbol on the connector strip, voltage is 230 VAC, max 100W. A led is activated next to the
button on the control panel when lights are activated.
Function times and settings:
- preset time 0 ... 23 hours
- function time 0 ... 6 hours
2