Exchange Of The Led Lighting - Ninka Qanto Id A5 Mode D'emploi

9.1 Exchange of the LED lighting

Plug +
Bushing
Step 1:
Remove the LED lamp plug from the connection bushing and
pull the cable out of the cable duct.
Step 2:
Loosen both fastening screws of the LED lamp using a screw-
driver TX20.
Step 3:
Remove the defective LED lamp.
Qanto_Id_A5_ 0000.50.65062-US
Disassembly
1.
Cable duct
LED lamp
3.
TX20
2.
EN
27