Télécharger Imprimer la page

HQ Power VDL7SS Mode D'emploi page 2

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing HQPower™! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
2.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
3.
Operation
1.
Loosen the tripod clutch A and adjust the tripod legs to the greatest spread for
maximum stability.
2.
Tighten the tripod clutch A securely.
3.
Carefully place the speaker on the mounting pole. The speaker should have a
base mounting hole for use with a 1-3/8"(35mm) diameter pole mount.
4.
Make sure the speaker is stable and will not topple over even if bumped or
pushed.
5.
To crank up or down, first loosen the clutch B. Then press the button C and do
not let go.Then turn the crank handle D.
6.
When cranking up or down, you need to keep pressing the button C. After
cranking to the desired height, let go of button C and then tighten the clutch B.
4.
Technical Specifications
material
max. load
adjustable height
tube
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 07/03/2013
VDL7SS
USER MANUAL
steel tubes, strong plastic crank
100 kg
2.1 - 1.3 m
Ø 35 mm
5.5 kg
2
©Velleman nv

Publicité

loading