Traxxas Pro Scale 9883 Instructions De Montage page 3

®
Pro Scale LED Light Kit Installation Instructions
Kit Contents:
• LED headlights/tail lights harness assembly
• Zip ties (6)
Tools required:
• 1.5mm hex wrench
• Side cutters (to trim zip ties)
BODY DISASSEMBLY
1. Remove zip ties (3).
2. Remove front LED headlight
retainers and light harness.
6x10mm
Stock LED
BCS
Headlight
1.6x7mm
BCS
Note: Retain and reuse hardware. Discard the parts or save for future use.
3. Remove the existing tail light housings.
Tail Light
Housing
1.6x7mm
BCS
Note: Discard these parts and hardware or save for future use.
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
Stock
LED Headlight
1.6x7mm
BCS
6x10mm
BCS
Tail Light
Housing
1.6x7mm
BCS
If you have questions or need technical assistance, call Traxxas at
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
T RA XXA S. com
www.modellmarkt24.ch
LED LIGHT INSTALLATION
1. Install the left and then right LED headlight assemblies (A).
2. Route both LED tail light assemblies toward the rear of the body (B).
Right LED Headlight
Assembly
A
6x10mm
BCS
1.6x7mm
BCS
3. Install the right and then left LED tail light assemblies.
Left LED Tail Light
Assembly
1.6x7mm
BCS
Visitez Traxxas.com/manuals pour télécharger
les instructions dans votre langue.
Visite la página Traxxas.com/manuals para
descargar el instrucciones en su idioma.
Auf Traxxas.com/manuals, können Sie
anleitung in Ihrer Sprache downloaden.
Covers Part #9883
Left LED Headlight
Assembly
1.6x7mm
BCS
6x10mm
BCS
B
Right LED
Tail Light
Assembly
1.6x7mm
BCS
HKC23079-R00 Rev 230810