Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Problem
Pilot cannot be lit
Pilot is lit, burner won't
light
Burner makes popping
noise when gas is shut off
Has yellow/orange flame
and black smoke
Aforementioned issues are just for reference. If any failure occurs, please stop using and contact a professional technician to
check and repair. ALWAYS be safe and shut off the power supply and gas supply before performing any maintenance.
Possible Causes
Gas pressure is too low.
Fire hole is blocked.
Gas control valve is defective.
Gas pressure is too low.
Main nozzle is blocked.
Gas control valve is defective.
Nozzle diameter does not match gas supply.
Damper is opened too much.
Gas supply pressure is too low.
Nozzle diameter does not match gas supply.
Damper is not opened enough.
Gas is nearly empty.
Regulate the pressure valve.
Unblock the fire hole.
Replace gas control valve.
Regulate the pressure valve.
Unblock the nozzle.
Replace gas control valve.
Regulate nozzle diameter.
Reduce damper opening.
Regulate the valve.
Regulate the nozzle diameter.
Adjust the damper opening.
Replace gas.
12
Solutions
Publicité
