Dorel Asia baby RELAX DA7757G Mode D'emploi page 11

TODDLER BED
DA7757G / DA7757W
STEP 6
Insert wood dowels (6) into both ends of narrow support slats (L) and wide support slats (K).
Insert barrel nut (3) into the hole center support slat (J). Ensure the barrel nut (3) is flush with center
support slat (J).
Attach the center support slat (J) to the right side rail (H) by inserting bolt (1) through the right side rail (H)
and into the barrel nut (3). Use Allen key (4) to tighten the bolt (1).
Insert the wide and narrow support slats (K & L) into the grooves of the right side rail (H). Ensure the
dowels in the slats go into the holes on the side rail.
NOTE: Barrel nut (3) can be rotated using a screwdriver (not included) to properly align with the bolt
coming through side rail (H).