Publicité
Les langues disponibles
Les langues disponibles
Plug in isolation filter
882 12
Caracteristics
- 5°C to + 45°C
Connecting
882 12
Operation
Start up in the case of a mains borne installation
Random operation owing to disruptive interferences necessitates the connection of an input filter ref. 036 09 upline of the installation.
In three-phase : transmitters and receivers must be on the same phase; if this is impossible, use a phase coupler ref 036 08.
Tracking down an electrical interference-generating appliance : disconnect appliances one at a time (T.V., computers, Hi-Fi...)
in order to isolate the source of the disturbance. Then incorporate an isolating filter ref. 882 12 between the socket outlet and plug.
Tension
±
100 - 240 V
Frequency
Intensity max.
50 - 60 Hz
If connection of an appliance (e.g : TV or computer)
to a power point upsets operation of remote control
receivers or transmitters, use the plug in isolating filter.
5 A
Publicité
