Danby DPF073C3WDB Manuel Du Propriétaire page 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hinge cover and upper hinge from
the top right side of the cabinet. Remove the
freezer door from the cabinet. Remove the screw
hole cover from the top left side of the cabinet
and install it on the top right side of the cabinet.
2. Remove the center hinge. Remove the
refrigerator door from the cabinet. Remove the
screw hole cover from the left side of the cabinet
and install it on the right side of the cabinet.
3. Remove the lower hinge and adjustable foot
from the bottom right side of the cabinet.
4. Remove the pin shaft from the right side of the
lower hinge. Install it in the left side of the lower
hinge. Install the lower hinge and adjustable foot
on the bottom left side of the cabinet.
5. Remove the door stops from the bottom right
side of the refrigerator door and install them on
the bottom left side of the refrigerator door.
5