Publicité
Les langues disponibles
Les langues disponibles
WHEN THE DISPLAY IS SHOWING E5
• Press and release the "S" button and the display will change to "P"
• Press the "P" button 2 times and the display will changes to "n1"
• Press the "S" button and the display will change to "1"
• Press the "S" button again and the display will change to "0"
• Press the "P" button to save the value
• Turn the power off and then on again to complete the programming.
ERROR CODES
ERROR CODE
E1: Operational failure.
E2: Over current or under voltage.
E3: The board cannot read the
parameter.
E4: Hall signal error.
E5: Needle position problem.
E6: Motor Overload.
SOLUTION
E1: Machine is locked. Check to see if the
machine is difficult to turn, or if there is a
lack of lubrication.
E2: Check the power source to ensure that
the voltage is within range.
E3: Turn the power off and on twice, and
try again. If the problem still cannot be
solved, contact your dealer.
E4: Replace the main fuse. If the problem
continues to persist, please contact your
dealer.
E5: Check if the synchronizer is connected.
E6: The sewing machine is jammed not
allowing the motor to turn.
06
Publicité
