Wispeed F820 Manuel D'utilisation page 63

7- Maintenance and storage
Your scooter requires regular maintenance. The following steps describe the
important steps and requirements associated with its maintenance
7.1 Cleaning
•
Check that the power supply and charging cable of your scooter have been
disconnected.
•
Clean your scooter with a soft, dry cloth.
WARNING!
•
Your WISPEED F820 is IPX5 certified. However, it should not be submerged.
Never clean the WISPEED F820 by soaking it in any liquid. However, it should
not be immersed in water or subjected to a jet of water. Therefore, never clean
the WISPEED F820 with high-pressure water jets or dip it in any liquid.
•
Do not allow water or other liquids to infiltrate into the WISPEED F820, as this
may cause irreversible damage to the electronic components. Your product
would then be excluded from the warranty.
•
When installing or replacing the CR2032 batteries in the rear light, make sure
the rear light is closed tightly to prevent water from infiltrating in. This could
cause damage to the fire which would no longer be covered by the warranty.
p. 63