Technics SA-C600 Manuel D'utilisation page 16

Playing back CDs
1 Press [ ] to turn this unit on.
2 Press [CD].
3 Open the top cover with a sliding
motion and then insert the CD.
• The top cover can slide to the both sides.
• Place the CD with its label facing up, and
push the center of the CD until a clicking
sound is heard.
4 Close the top cover with a sliding
motion.
• This unit cannot play back the CD while the
top cover is open.
5 Press [ ].
■
To eject the CD
Open the top cover with a sliding motion.
Eject the CD.
• Be careful not to hit the CD with the top
cover.
• Eject the CD after the CD has stopped
turning.
Note
• Be careful not to get your finger caught in the
top cover when opening/closing it.
• Be careful not to touch the lens with your
fingers.
• The lens lights when the following operations
are performed with no CD inserted. This is not
a malfunction.
- When turning the power on
- When selecting "CD" as the input source
16
(16)
- When opening and closing the top cover
■
Repeat Playback/Random repeat playback
Press [MENU].
Press [ ], [ ] repeatedly to select
"Repeat"/"Random" and then press [OK].
Lens
Press [ ], [ ] repeatedly to an item and then
press [OK].
• During random playback, you cannot skip to
the previous track.
■
Program playback
Press [PGM] in the stop mode.
• "Program Mode" screen is displayed.
Press the numeric buttons to select tracks.
• Repeat this step to make further selections.
Press [
• Press [ ] or [ ] in the stop mode to check the
programmed order.
• Press [CLEAR] in the stop mode to clear the last
track.
• Press [PGM] in the stop mode to cancel the
program mode, and the program memory will
be stored.
• Press [
to cancel the program mode. (The program
memory will be cleared.)
Note
• The program memory is cleared when
replacing the CD.
• The program mode is cancelled when the
random repeat playback is set.
■
MQA decoding
This unit includes the MQA (Master Quality
Authenticated) technology, which enables
playback of MQA audio files and streams,
delivering the sound of the original master
recording. This unit is a CD player that can
recognise an MQA-CD. The built-in MQA
decoder will restore the high-resolution signal
heard in the studio and confirm it, using the
authentication signature. Visit www.mqa.co.uk/
customer/mqacd for more information.
• "MQA" is displayed while MQA content is
played back. MQA content type (MQA Studio,
etc.) can be displayed by pressing [INFO] while
playing back MQA audio file.
] to start playback.
] in the stop mode and select "Yes"