BoomToneDJ MS-8A Mode D'emploi page 6

AMPLIFIER FUNCTIONS
(1) Power supply connector
Connect the power cord (included) to this connector. Make sure the voltage
selector is set on the correct voltage for your country.
(2) ON/OFF power switch
Make sure all levels are down before switching ON the amplifier.
(3) Voltage selector.
Before switching ON your amplifier, make sure the selected voltage is the correct
voltage for your country.
(4) Bass
Basses adjustment. Adjust your Basses level from -12dB to +12dB.
(5) Treble
Treble adjustment. Adjust your Treble level from -12dB to +12dB.
(6) Master
Master Volume adjustment.
(7) MIC level
Microphone input level adjustment.
(8) MIC IN
XLR input for microphone
(9) LINE IN
XLR line level input (mono input)
(10) LINE IN
RCA line level stereo input.
(11) LINE OUT
Line level output to connect another active speaker or an amplifier.
HOW TO USE ?
1- Connect your source to the speaker. (Make sure all units are switched OFF before
connection).
2- Turn ON your source
3- Make sure all your active speaker levels are down, turn ON the MS speaker.
4- Adjust the levels you need ... Input level (7) and Master level (6)
English
6