BoomToneDJ MS-12A MP3 Mode D'emploi page 8

AMPLIFIER FUNCTIONS
(1) Power supply connector
Connect the power cord (included) to this connector. Make sure the voltage
selector is set on the correct voltage for your country.
(2) ON/OFF power switch
Make sure all levels are down before switching ON the amplifier.
(3) Voltage selector.
Before switching ON your amplifier, make sure the selected voltage is the correct
voltage for your country.
(4) BASS
Basses adjustment. Adjust your Basses level from -12dB to +12dB.
(5) TREBLE
Treble adjustment. Adjust your Treble level from -12dB to +12dB.
(6) Master
Master Volume adjustment.
(7) MIC IN
6.35mm ¼ Jack Input for microphone
(8) MIC IN XLR
XLR Input for microphone
(9) MP3& Bluetooth Module
Please see next page for this module description.
(10) MIC Level
MIC1 separate level adjustment
(11) RCA Line input
Stereo Line Input
(12) LINE IN
XLR balanced Line level input.
(13) Line Level
Separate line level adjustment.
(14) Line OUT
¼ Jack line out for another active speaker connection or any other amplifier.
(15) Line OUT XLR
XLR line out for another active speaker connection or any other amplifier.
English
8