U.S.Robotics 8001 Guide D'installation Rapide page 11

If you have a static IP address, select Static IP Address as the WAN Type in the Web User Inter-
face.
My cable or DSL service is not working, but I need to access the Internet.
Possible Solution:
If you have an external analogue modem and dial-up Internet service, you can still access the
Internet.
• Connect the external analogue modem according to the procedure described in this
guide.
• Open a Web browser and type http://192.168.123.254 and press Enter to access the
Web User Interface.
Click Primary Setup > Change > Dial-up Network.
•
• Enter the appropriate information for your dial-up Internet service and click Save.
While trying to check my network configuration settings in Windows Me or XP, I
can't find the Network icon.
Possible Solution:
The default setting in Windows XP and Me is to not show all of the icons within the Control Panel.
To change the default setting to show all icons:
Windows XP users:
Click Windows Start > Control Panel.
•
• Within Control Panel, click View all Control Panel options on the left side of the
screen.
Windows Me users:
Click Windows Start > Settings > Control Panel.
•
• Within Control Panel, click View all Control Panel options on the left side of the
screen.
All the Control Panel icons should now be visible.
I don't know how to configure the TCP/IP protocol to work with the router.
Possible Solution:
You have the TCP/IP protocol installed, but it is not configured to work with the router.
Windows XP users:
Click Windows Start > Control Panel.
1.
2. Double-click the Network Connections icon.
3. Click the General tab, and select the TCP/IP line that has been assigned to your net-
work card.
4. Click the Properties button.
5. Configure IP addressing:
• To obtain the IP address automatically through the DHCP server:
Click the General tab, select Obtain an IP address automatically, and click OK
> OK. This is the preferred method for configuring PCs.
7