Publicité
Les langues disponibles
Les langues disponibles
Preface
Dear customer:
Thank you for using the JIGOO Mite
Cleaner. The content in the manual is
for reference in use and maintenance.
For matters not covered, please consult
our customer service.
Contents
Product Introduction ......................................................02
Instructions for Use ..........................................................02
Maintenance ........................................................................ 03
Troubleshooting ................................................................ 04
Specifications ...................................................................... 04
Note .............................................................................................04
Environment .........................................................................05
Compliance Statements ...............................................05
Dust mite
digital display
➂ Function panel
UV lamp
Bottom plate
Main unit
Instructions for Use
• Put the Smart Mite Cleaner on the bed,
connect to the power supply, press the power
switch and gently push it back and forth to
clean.
Dust sensing
Function
Ultrasonic generator
Bottom plate lock
Roller brush assembly
Product Introduction
Packing List
Smart Mite Cleaner*1
Cleaning brush*1
User Manual*1
Names of Parts
Power switch
Display
Roller brush
window
➀ Main unit
Filter
➁ Cyclone component
Tips:
• There is no need to lift up or hold down the Mite
Cleaner forcefully; simply put it on the bed and push it
back and forth;
• In order to avoid injury, the UV lamp must be within
3cm of the irradiated object and the inclination angle of
the machine should not exceed 30°. Outside of this
range, the UV lamp will automatically turn off;
• To avoid injury, do not look directly into the UV ray.
• It is normal that some odors are discharged from the
air outlet of the Smart Mite Cleaner when it is used for
the first time.They will not harm human health and will
naturally disappear later;
• The high-speed airflow sound generated by the Smart
Mite Cleaner is normal.
Cleaning frequency
At first, it is recommended to use the Smart
Mite Cleaner 2-3 times a week; later, it is
recommended to use once a week.
Note:
• When the machine is not used for a long time, please
place it in a cool and dry place, away from direct
sunlight and moisture.
• When it is used for the first time, there will be more
garbage; with use, the garbage will reduce accordingly.
• After use, clean the dust barrel assembly.
Filter sponge*2
Inlet sponge*2
Dust cup
release button
Dust cup
Filter sponge
EN
02
Publicité
