ULTIMEA Poseidon D60 Mode D'emploi page 5

4 CONNECT TO TV VIA OPTICAL / AUX
OPTICAL
DIGITAL AUDIO
OPTICAL
OPTICAL
OPTICAL
OPTION 1: OPTICAL
NOTE:
Make sure the TV's port is OPTICAL OUT.
1
lf audio is coming from the internal TV
2
speakers, mute or minimize the TV volume.
In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
5 CONNECT TO BLUETOOTH
NOTE:
Press the " " button on the soundbar or remote control to enter Bluetooth pairing mode.
1
Go to the Bluetooth setting on your phone, find and select "Poseidon D60" to connect the soundbar.
2
Note: If it's already in the Bluetooth mode and connected, press and hold "
choose to connect to new device manually on your mobile phone / PC / TV.
6 CONNECT TO SUBWOOFER AND SURROUND SPEAKERS
AC IN
7 PAIRING SUBWOOFER
Step 1
OUT
Batteries not included
SL SR
ON/OFF
ON/OFF
Step 2
AUX
AUDIO IN
L
R
AUDIO OUTPUT
L
R
AUX
OPTION 2: AUX
NOTE:
Connect the 3.5mm to RCA Audio Cable to
1
your TV's AUDIO OUT port.
Make sure the color of the cable ends
2
matches the color of the TV ports.
" button for 3 seconds to disconnect current device and
Use the 6m RCA-RCA cables to connect the subwoofer
1
and surround speakers, please pay attention to match
the same color interfaces on the surround speakers
with the corresponding ones on the subwoofer and
place the surround speakers accordingly.
2 Use power cable to connect your subwoofer and power
port.
The subwoofer has been paired with the soundbar
by ULTIMEA.
However you may need to re-pair the soundbar
and subwoofer if there is no sound coming from
the subwoofer.
Step 1:
Press and hold the " " button on the remote
control for 3 seconds, the display will show "SUb" flashing.
Step 2:
Press and hold the ON/OFF button on subwoofer for 3
seconds, the white LED will be fast flashing.
The white LED will be solid on when the subwoofer is paired
successfully.
Poseidon D60
03