Publicité
INSTALLATION INSTRUCTIONS
104
WS-10427
FIG 1.
4CCT Switch
Driver
4.
Secure the mounting back plate to the junction box using standard junction box screws that comes with the junction box.
(i)using any other non-original-manufacturer provided junction box screw may result in safety issue.
(ii) The side of the mounting plate marked "GND" must face out.
5.
The lamp can switch between four color temperatures (2700K-3000K-3500K-4000K),which can be adjusted to your preference with
the switch in the canopy (Fig. 3).
Note: the switch comes with a detachable cover, Remove the cover prior to adjusting the color temperature, Fasten the cover after
adjustment is made.
to the back plate using the GND screw provided. After wires are connected, tuck them carefully inside the junction box.
Fig. 2 Wiring
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
modernforms.com
Phone (800) 526.2588
Fax
(800) 526.2585
D
Plastic Anchor
Junction Box
A
Wire Connector
Ground Wire
C
Junction Box Screw
Mounting Plate
E
Wood Screw
B
Mounting Screw
mounting back plate using the mounting screw (B). (Fig.1)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
mounting back plate.
4000K 3500K 3000K 2700K
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
BACK PLATE DIMENSIONS
21 1/8"
1 3/8"
1 3/4"
25 7/8"
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
program. Oct. 2023
2
Publicité
