Publicité
2.5-inch Hard Drive: How to Install the Hard Drive
C
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
2. Attach the HDD cage to the bottom panel
1. Remove the six screws on the bottom case.
and secure it with the four screws.
en li up and remove the bottom panel.
connect the SATA cable to the HDD.
5.
en reinstall the bottom panel.
4. Connect the SATA Cable to the connector.
SO-DIMM Slots: How to Install the
D
Memory Modules (DDR5 Voltage (1.1V))
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules
de mémoire / Come installare i moduli di memoria / Cómo instalar los módulos de memoria /
/ Como Instalar os Módulos de Memória /
메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM
2. Push down until the modules
memory modules into the slot
snap into place.
at a 30-degree angle.
Note:
-
e iBOX 1300/D5 Series requires DDR5 SO-DIMM (1.1V).
- For dual channel con guration, you always need to install identical (the same brand,
speed, size and chip-type) DDR5 SO-DIMM pairs.
How to Install M.2 Heatsink
如何安裝散熱片
1. Remove the four screws on the front cover
2. Install the nut.
and take of the front cover
en remove
the motherboard screw.
3. Connect the SATA Data and Power Cable to
en
the HDD.
*For iBOX 1300/D5 Series, it is not recommended
to install 2.5" HDD. If you install the 2.5" HDD,
please keep the iBOX 1300/D5 Series in a vertical
position to ensure better cooling performance.
How to Install Dimm Pads
如何安裝散熱墊片
1. Install top dimm pad and bottom
dimm pad accordingly.
3. Remove the membranes on the
4. Reinstall the bottom panel and
both sides of the M.2 heatsink.
the front cover.
Attach the M.2 Heatsink to the
motherboard and secure it with screws.
How to Install the VESA Bracket
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
/
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
1. Attach the two screws to the base of the
iBOX 1300/D5 Series.
How to Install the Wall Mounting Brackets
如何安裝壁掛架 / So installieren Sie die Wandmontagehalterungen / Installation les supports de montage mural / Come installare le sta e di montaggio a parete / Cómo instalar los soportes para
instalación en pared /
ブラケットの設置方法
1. Attach the wall mounting brackets to
the base of the iBOX 1300/D5 Series
and secure them with screws.
Positions of the iBOX 1300/D5 Series
iBOX 1300/D5 系列擺放 / Positionen der iBOX 1300/D5 Series / Positions de la série iBOX 1300/D5
Series / Posizioni della iBOX 1300/D5 Series / Posiciones de la iBOX 1300/D5 Series /
iBOX 1300/D5 Series / Posições de iBOX 1300/D5 Series / iBOX 1300/D5 Series
시리즈의 위치 / iBOX 1300/D5 Seriesシリーズの位置
e iBOX 1300/D5 Series can be placed in vertical or horizontal position.
Horizontal Position
Vertical Position
*Please note that keeping the iBOX 1300/D5 Series in a vertical position will
ensure better cooling performance.
e terms HDMI® and HDMI High-De nition Multimedia
Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
2. Attach the VESA Bracket to the rear of
3. Mount the iBOX 1300/D5 Series by sliding it
a compatible display using the four screws.
into place.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
/ Como instalar as braçadeiras de montagem na parede / 벽면 마운팅 브래킷을 설치하는 방법 / 壁取り付け
Dimension of the iBOX 1300/D5 Series
with Wall Mounting Brackets Installed
2.
e iBOX 1300/D5 Series is installed
with the wall mounting brackets.
How to Install the Din Rail Mounting Bracket
(Optional)
如何安裝 DIN 導軌安裝托架 (選購) / So installieren Sie die DIN-
Schienenmontagehalterung (optional) / Installation du support de montage sur
rail DIN (en option) / Come installare la sta a di montaggio su guida DIN
(opzionale) / Cómo instalar el soporte para instalación en riel DIN (opcional) /
Como instalar a braçadeira de montagem do trilho DIN (Opcional) / 딘 레일
마운팅 브래킷을 설치하는 방법(선택 사항) / DINレール取り付けブラケッ
ト（別売）の設置方法
VESA-mounted
1. Attach the Din Rail Bracket to the base of the
iBOX 1300/D5 Series.
2. Secure it with screws.
Note:
Din Rail Bracket is not provided by default.
Please purchase it seperately if needed.
197.4mm
187.1mm
99.2mm
110.4mm
DIN (
) /
Publicité
