Whispbar K536W Instructions De Montage page 10

EN
Fitting Kit
K536W
It is important to put the grubscrews in the
correct position on the vehicle.
A = M6 x 40mm (1 5/8")
B = M6 x 60mm (2 3/8")
C = M6 x 70mm (2 3/4")
Screw M6 grubscrew into adaptor. Tighten
using 3mm (1/8") hex key.
Do not over tighten.
Repeat for all six positions.
Place crossbar foot over grubscrews.
10