Publicité
Filter removal/cleaning/refitting
Important: The kettle must be switched off, disconnected from the
power outlet and allowed to cool down completely prior to
removing or refitting the
filter. Do not use excessive force, as this might damage the filter
or the lid.
1. Empty the kettle and open lid.
2. Hold lid open with one hand and grip the top part of the filter
with index finger and thumb. Caution: Keep fingers clear of
mesh. Pressing into mesh may damage filter.
3. To remove filter simply pull upwards. This will disengage the
filter from its guides (see illustration).
4. To clean the filter, rinse under a tap while brushing it gently
with a soft brush.
5. To refit filter, once again hold lid open with one hand and filter
with index finger and thumb. Gently push filter back into the
kettle until it fits snugly in its guides. Be sure to fit the bottom
tab of the filter snugly in the center guide. This will center the
filter in the spout, ensuring a good fit. Once the tab is in the
front guide push the filter forward to snap it into place.
6. Rinse out kettle with fresh water and it's ready for use.
Remove
5
Refit
use
Publicité
