Publicité
Les langues disponibles
Les langues disponibles
Before the maintenance operations:
•
Stop the machine.
•
Remove the battery pack.
•
Cool the motor.
•
Store the machine in cool and dry place.
•
Use correct clothing, protective gloves and safety glasses.
10.2
CLEAN THE MACHINE
•
Clean the machine after use with a moist cloth dipped in
neutral detergent.
•
Do not use aggressive detergents or solvents to clean the
plastic parts or handles.
•
Keep the trimmer head free of grass, leaves, or excessive
grease.
•
Keep the air vents clean and free of debris to avoid
overheating and damage to the motor or the battery.
•
Do not spray water onto the motor and electrical
components.
10.3
REPLACE THE SKID PLATE
1. Remove the screws with a Phillips Head screwdriver (not
included).
2. Replace with the new skid plate (1).
3. Tighten the screws.
10.4
REPLACE THE WHEEL
1. Remove the battery.
2. Remove the knob (1), washer (2), wheel (3), axle sleeve
(4), washer (2) and wheel axle (5) orderly from the wheel
assembly.
English
3. Replace with the new wheel.
4. Insert the wheel axle (5) through the slot (6) downward,
then put the washer (2), axle sleeve (4), wheel (3), washer
(2) and knob (1) orderly through the wheel axle.
5. Tighten the knob (1).
11
TRANSPORTATION AND
STORAGE
Remove the battery pack from the machine before
transportation and storage.
11.1
MOVE THE MACHINE
1
When you move the machine, you must:
•
Stop the machine.
•
Remove the battery pack.
11.2
STORE THE MACHINE
•
Remove the battery pack from the machine.
•
Make sure that children cannot come near the machine.
•
Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
•
Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
9
5
2
4
6
WARNING
EN
3
2
1
Publicité
