Monster Group T-Mech 210299 Mode D'emploi page 11

USER GUIDE
MAINTENANCE
• Always unplug the vacuum from the power supply before undertaking any
maintenance.
•
• Do not clean this vacuum under running water and do not use a pressure washer.
• Do not use hard or pointed items for cleaning the vacuum.
• Regularly remove accumulated debris from the wheels, brush head and cover.
• Regularly check the vacuum for damage. If any damage is found, do not use the
vacuum, and arrange for repair.
REPLACING THE BRUSH HEAD
NOTE: We recommend wearing gloves when
replacing the brush head.
1. Disconnect the vacuum from the power
supply.
2. Unscrew the brush head securing bolt
(1) on the underside of the chassis.
3.
4. Slide the replacement brush on to
on the brush head lines up with the
5. Retighten the securing bolt (1) to secure
the brush head.
210299 - T-MECH ARTIFICIAL GRASS VACUUM
1
11