Create Silkair Connect Pro Manuel D'instructions page 11

INSTALL ATI ON OF T HE H EAT PI PE
1. Take out the outer connector assembly and the exhaust pipe
assembly, and remove the plastic bags;
2. insert the heat pipe assembly (the end of the exhaust joint)
into the back panel vent slot (push to the left) and complete
the assembly.
INSTALL ATI ON OF T HE WI ND OW SEA LI NG P L AT E
1. Half open the window and mount the window sealing plate assembly to the window. Com-
ponents can be placed in horizontal and vertical direction.
2. Pull the components of the window sealing plate assembly open, adjust their opening dis-
tance to bring both ends of the assembly into contact with the window frame, and fix the
components of the assembly.
Notes: The flat end of the exhaust pipe joints must be snapped into place. The pipe cannot be
distorted nor have substantial turning (greater than 45°). Keep the ventilation of the exhaust
pipe not blocked.
INSTALL ATI ON OF T HE APPL IANCE
1. Move the air conditioner with installed heat pipe and fittings in front of the window, and
the distance between the body and walls or other objects shall be of at least 50 cm.
50 cm
50 cm
E NGLI SH
11