Samsung WF45N6300A Serie Manuel D'utilisation page 34

Operations
04 Spin
05 Soil Level
06 Options
07 START/PAUSE
08 POWER
34 English
WF6300N_DC68-03665J-00_EN.indd 34
Press to change the spinning speed for the current cycle.
• Extra High: Extends the spinning process to effectively remove
moisture from the load.
NOTE
Extra High uses a stronger spinning process to remove moisture,
so it is not suitable for wrinkle-free or no-iron fabrics, or
overloads.
• High: Underwear, t-shirts, jeans and sturdy cottons.
• Medium: Jeans, wrinkle-free or wash-and-wear items and
synthetics.
• Low: Delicate items that requires a lower spinning speed.
• No Spin: The drum does not spin after the final drain process.
• Rinse Hold (No lamp turns on): The final rinse process is
suspended so that the laundry remains in the water. To unload
the laundry, run a drain or spin process.
NOTE
Spin Only: This cycle is dedicated to the spinning process. Press
and hold Spin for 3 seconds. With the cycle time on the display,
press Spin repeatedly until a desired spinning speed is selected.
Then, press START/PAUSE to start the cycle. This cycle is available
only when no specific cycle is selected.
Press the button to select the soil level/washing time.
• Heavy: For heavily soiled loads.
•
• Normal: For moderately soiled loads. This setting is best for
most loads.
•
• Light: For lightly soiled loads.
Press the buttons to select different cycle options.
Press to Start or Pause operation.
Press to turn the washer on or off.
2017-12-06 5:17:00