Adler europe AD 2113 Mode D'emploi page 4

immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified electrician
before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20. Do not leave the unit on to the wall outlet or power supply unit unattended.
21. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power adaptor
cable to the device, and then connect the power adaptor to the power socket.
22. Keep the device out of the reach of children. Using the device by children must be
supervised by adults.
23. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
24. Do not wrap electric cable around the device.
25. Do not use a hair curling iron in the bath.
26. Do not remove dust or foreign bodies from the inside of the hair straightener using sharp
objects.
27. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
28. Do not cover the hair curling iron, it might cause the accumulation of heat in its interior
and it may cause damage or fire.
29. Hairsprays contain flammable materials. Do not apply them while using the device.
30. Do not use the device on people who are sleeping.
31. The device can be supplied only with the voltage specified on the housing.
32. During operation, do not place the device on wet surfaces or clothes.
33. After use, turn off and unplug the unit. Wait until the device cools down before storing.
34.During the operation ceramic plates heat up to high temperatures. Do not touch hot parts
of the hair curling iron and do not allow contact with the skin of the head, because it may
cause burns
35. The device is not designed to work with external schedulers or separate remote control
system.
DEVICE DESCRIPTION
1. Cool tip
3. Clip
5. Stand
7. Control lights
INSTRUCTIONS FOR USE
1. Connect the unit to the power. Place the device on the stand (5) in safe position.
2. Turn the unit on by pressing the on/off switch for 3 seconds. (6)
3. The LED control lights will start to blink.
4. Choose desired temperature: 140°C, 160°C, 180°C, 200°C, by pressing power switch (6) for 2 seconds.
CURLING FUNCTION
1. Start with separating a strand of hair.
2. Open the clip (3) using the lever (4), place the strand of hair so that the hair ends protrude slightly beyond the clip. Close the clip.
3. Wind the hair strand around the curling iron wand, starting at the hair tips and moving closer to the head.
CAUTION: Avoid touching the head skin with the curling iron – this may cause burns.
4. For heavy curl effect, keep the strand of hair wound around the curling iron wand for +/-30 seconds or for a shorter time for light curls or
crimped hair.
5. After use, switch the iron off with the on/off switch (6) by pressing it for 3 seconds, then unplug it from the power source.
CLEANING AND MAINTENANCE
1. Prior to cleaning, unplug the device from the power source and wait until it is cool to the touch.
2. Clean the body of the device with moist cloth. Never immerse the device in water or other liquids.
3. Do not wind the power cable around the device.
2. Ceramic wand with plastic bristles
4. Lever
6. On/off power switch
8. Swivel power cord
4