Publicité
Using Bluetooth Playback
Pairing to Bluetooth Wireless Speakers or Sound Bar
NOTE: Bluetooth is ON by default when the projector first powers ON.
Bluetooth can be turned ON or OFF from the OPTIONS Menu.
1.
Enable Bluetooth on the receiver (external speakers, sound bar, etc.) to
which you wish to connect. Devices such as smartphones, tablets, or
computers are not Bluetooth receivers and will not connect to the projector.
To eliminate confusion, you should disable Bluetooth on all receivers to
which you do not wish to connect.
2.
Power on the projector and make sure the projector's Bluetooth is ON (see
note above). The projector will begin searching for nearby Bluetooth
devices to connect to, and will automatically initiate pairing.
3.
When successfully paired, the Bluetooth receiver should indicate it is
connected, usually with a chime or other audible noise. Check the user
manual on your Bluetooth receiver for more information.
4.
When successfully connected, the projector will display the Bluetooth
receiver's name on the top right portion of the Main Menu screen, and
sound played from the projector will be heard through the Bluetooth
receiver.
After initial pairing, the projector and the Bluetooth speakers will stay paired
unless unpaired manually by the user, or erased due to a reset of either device. If
this occurs or you find either unit is unable to connect, repeat the above steps.
Note: If external devices are connected with a VGA cable, only video image is
transmitted (no sound).
The Bluetooth option can't be used in vga mode.
"This product has a bluetooth transmission function, you can not receive any
bluetooth sound on it: this means that you can transmit wirelessly a bluetooth
sound signal to an external device like a bluetooth speaker, bluetooth headphone,
audio system with bluetooth reception,..."
Warning about sound delay during Bluetooth transmission
It could be that you experience a slight delay between the image of a movie and
the sound you transmit.
This is due to different Bluetooth chipsets used in the LCD projector and your
audio device (speaker or headphone).
You can try to stop and reconnect the audio device a few times, but if the
problem is not solved you better connect the external speaker or headphone by
cable through the earphone jack (14)
20
Publicité
