Uline H-3012 Guide Rapide

π
H-3012
PLASTIC AND FIBER
DRUM TRUCK
WARNING! Read all instructions before using
this truck.
1. Position truck with both nose pads in contact with
bottom edge of drum. (See Figure 1)
2. Wrap belt around drum and place in fork grooves,
if existing. (See Figure 2)
NOTE: Make sure belt is not twisted.
3. Tighten belt so that truck frame touches upper part
of drum. (See Figure 3)
PAGE 1 OF 3
1-800-295-5510
uline.com
OPERATION
Figure 1
Figure 2
Figure 3
4. Pull truck back carefully just until drum rests on nose
pads, then re-tighten belt. (See Figure 4)
5. You are now ready to transport the drum.
(See Figure 5)
NOTE: With heavier drums, place foot on
backrest for better leverage.
CAUTION! 1,000 lb/454 kg MAXIMUM CAPACITY.
• DO NOT OVERLOAD.
• DO NOT USE WITHOUT BELT.
• USE ON LEVEL SURFACES ONLY.
• DO NOT USE ON STAIRS OR RAMPS.
CAUTION! Make sure drum rests securely on
nose pads before moving. When unloading, be
sure to hold truck securely when loosening belt.
Para Español, vea página 2.
Pour le français, consulter la page 3.
Figure 4
Figure 5
0923 IH-3012