Publicité
Les langues disponibles
Les langues disponibles
When the power indicator keeps flashing in red, the filter should be replaced.
Please wipe the dust on the filter regularly, do not wash or use it repeatedly.
Please use the filter specially designed for this product.
Steps for installing filter (fig.1)
Unplug the power socket of the machine before replacing or installing the filter.
1.
Invert the machine and rotate the base along the direction marked "Open".
2. Take out the filter from the appliance.
3. Remove the packaging filter into the item.
4-5Then install the base, rotate and tighten the base along the direction marked "Close".
USE
When connect the appliance to the mains, the buzzer will ring for 1 second.
Button operation:
Power button (8)
Touch the power button to turn on the machine, the buzzer will ring for one time, the power indicator and
the low grade of wind speed indicator light turns green.
Touch the button again, the button again, the buzzer will ring for one time and the machine will turns off
with all the lights off.
Note: The machine will record the working modes when turns off without unplugging the power socket.
Timer button (9)
In the condition of working, press the timer button to set among the circulation of 2h, 4h and 8h timer
with buzzer rings, and the corresponding indicator will be on.
Press again, the timer indicator turns off and the machine will work continuously without timer.
In the status of timing, the machine begins of count down. When the time is up, the fan will stop working
and all the lights will be off.
Wind Speed button (10)
In the condition of working, press the wind speed button, the buzzer will ring for one time.
Press again to adjust the wind speed among the circulation of low, middle and high grade with buzzer
rings, the corresponding indicator will be on.
Anion/light button (11)
Ion function
To activate the Ion function, press anion/light button (11) for 3 seconds when the machine is on, ionizer
is on and the indicator light will be on.
13
Publicité
