KEUCO Royal Modular 2.0 800401DDEG05X00 Instructions D'utilisation page 3

Read all instructions before using or installing this product.
Technical data
– Supply voltage:
– Required electrical outlet:
– Maximal load each shelf:
– Maximal load mirror cabinet total:
- 800401160005X00:
- 800401160105X00:
- 800401161005X00:
- 800401161105X00:
- 800401170005X00:
- 800401170105X00:
- 800401171005X00:
- 800401171105X00:
- 800401180005X00:
- 800401180105X00:
- 800401181005X00:
- 800401181105X00:
- 800401190005X00:
- 800401190105X00:
- 800401191005X00:
- 800401191105X00:
- 800401200005X00:
- 800401200105X00:
- 800401201005X00:
- 800401201105X00:
- 800401210005X00:
- 800401210105X00:
- 800401211005X00:
- 800401211105X00:
– Degree of protection:
– Ambient conditions:
- Operating temperature
- Storage temperature
Mounting dimensions, see page 8.
Before installation check whether the fastening materials
included are suitable for the anchoring base. The fas-
tening materials are suitable exclusively for stud walls
with timber constructions or for drywall constructions with
timber wood reinforcement.
120V AC 50Hz/60Hz
15 A / 1800 W
max 3.3 lb
148.6 lb
163.1 lb
181.4 lb
199.7 lb
163.1 lb
178.8 lb
191.1 lb
210.5 lb
171.3 lb
187.8 lb
200.8 lb
221.3 lb
179.2 lb
196.6 lb
210.5 lb
232.1 lb
187.4 lb
205.7 lb
220.2 lb
242.9 lb
195.3 lb
214.7 lb
229.9 lb
254.0 lb
NEMA 1
32° – 113° F
-40° – 158° F
Installation, see fi gure 1 onwards on page 9.
• Mark the wall bracket position, see fi gure 1.
• Prepare the safety locking, see fi gure 2.
• Mount the wall brackets and safety locking to the
wall, see fi gure 3.
• Connect the mirror cabinet to the power supply,
see fi gure 4 on page 10.
• Hang the mirror cabinet on the wall from above,
see fi gure 5.
• Fix the mirror cabinet to the wall by turning the
screw of the safety locking counterclockwise, see
fi gure 6.
• Place the glass shelf holders in the mirror cabinet,
see fi gure 7 on page 11.
• Place the glass shelves in the mirror cabinet,
see fi gure 7.
• Adjust the doors of the mirror cabinet, see fi gure
8 – 10 on page 11 and 12.
Replacement parts with order numbers, see page 15.
The light sources may only be replaced by the
manufacturer, its customer service or by an
equally qualifi ed person.
For information about warranty and mainte-
nance, see the enclosed Care Instructions
and Warranty Card.
Disposal instructions
This category of device does not belong in
the domestic waste, but must be disposed of
separately in accordance with the relevant
local national regulations.
L
= BLACK
N = WHITE
PE = GREEN
US
3