Hardware Installation; Software Installation - IOGear Upstream Pro Hub GUV322 Guide De Démarrage Rapide

Hardware Installation

5
MIC / XLR INPUT
USB
R
MIC / STEREO INPUT
1 6 7

Software Installation

Download and install the IOGear UpStream Essentials
App from the iOS App Store or the Google Play Store.
This App is designed for GUV322 to manage and edit
the program results. The IOGear UpStream Essentials
App includes the following features:
•
Storyboard-like management
•
Scenes editor
•
Auto sensing switch
•
Chroma keying management
•
Audio mixer management
Please refer to the GUV322 user manual for further
details
4 3 2
PGM OUTPUT INPUT 2 HDMI INPUT 1
L
HDCP
ON OFF
9
8
1. Plug the power adapter cable into the
Power Jack.
2. Connect your first HDMI source device to
the HDMI 1 Input Port*.
3. Connect your second HDMI source device
to the HDMI 2 Input Port*.
4. Connect the HDMI Program Output Port
to an HDMI-enabled display using an
HDMI cable (not included) to display your
pre-programmed HDMI content.
5. If your laptop only has a USB-A interface,
connect the USB-B to USB-A Cable (in-
cluded) to your laptop. Or, if your Android
mobile device / laptop only has a USB-C
interface, connect the USB-B to USB-C
Cable (included) to your Android mobile
device / laptop respectively.
6. Connect your XLR audio source to the
Analog 2 Input Port.
7. Connect your RCA audio source to the
Analog 1 Input Port.
8. Press the Bluetooth Link Pushbutton
to pair up the GUV322 with your app
installed mobile device.
9. (Optional) For video switching, to display
the HDCP protected content to the
connected HDMI display (without video
capture), please put the HDCP switch
to ON.
* GUV322 cannot capture HDCP
protected content.
Third party video software recommendation*:
* Below lists some examples of supported video
recording / live streaming software. All trademarks are
property of their respective owners.
OBS: https://obsproject.com
Xsplit: https://www.xsplit.com
https://www.youtube.com
https://www.facebook.com
2