Publicité
Les langues disponibles
Les langues disponibles
4. Place the new filters in the main unit.
(True HEPA Filter should always be
inserted first, then the Carbon Filter)
5. To reset the filter light once a new True
HEPA and/or Carbon Filter is installed:
a. B e sure that back panel is snapped
in place.
b. Turn on the unit.
c. Locate the filter replacement icon on
the display panel.
d. Press and hold the filter replacement
icon for 3 seconds until unit beeps.
HEPA Filter icon will flash amber.
Press filter icon area to alternate
between HEPA and Carbon.
e. O nce desired filter is illuminated,
press and hold for 3-5 seconds. A
short beep will be heard and the light
should turn off. Repeat process for
each filter as needed.
10
10
Publicité
