brendz TULSA Manuel De L'utilisateur page 5

Operation
• Press and hold ON/OFF button for 3 sec. to turn the device ON or OFF. fig. 2
• When in ON mode, short press the ON/OFF button to switch between the three
light modes (low-midium-high) fig. 3
Specifications
Battery type:
Charging cable:
Solar panel:
LED type:
IP rating:
Measurements:
Weight:
Body material:
Troubleshooting
Problem
Cannot turn on
the lamp
Lamp Flashing
During Charging
CE is the abbreviation for Conformité européenne - And means Conforms to the
European guidelines. With the CE-mark, the manufacturer confirms that this product
complies with the current European guidelines. The Declaration of Conformity can be
requested from customercare@brandsgroup.com.
Old appliances marked with the pictured symbol must not be disposed of
with the trash. You must return them to a waste collection center (inquire
at your local community) or the retailer where they were purchased.
1x 18650 Li-Ion 3.7V 2200mAh battery
USB type C, input 5V 1A
Monocrystalline 1.8W
40 x Integrated 2835 SMD LED 0,3W
IP44 water-resistant
30 x 18 x 18 cm
1056 g.
Aluminum die casting
Reason
Lamp is out of power
Lamp is charging by
cable
Current adaptor's
charging power is
too low
Solution
Charge the lamp
The lamp is designed, for higher
Safety purpose, to not work when
charging by cable
Change to an adaptor with higher
power ( ≥5V 1A)