Publicité
PARTS DESCRIPTION
1. Dust cover
2. Dust Collecting Cup
3. Pre- filter
4. HEPA filter
5. Indicator light
6. On/Off power switch
7. Handle
8. Charging socket
9. 2 in 1 nozzle
10. USB charging cable
Technical Information
Rated Power: 50 Watt
Voltage: DC 7.2V.
Continuous working time: 20 min.
Capacity for dust collection: 0.3 L
USE
• Remove the device form the charging cable and press the On/Off
switch. Turning the device On, it can be used to clean dry dust. It
can also be used to collect small spillages.
• 2 in 1 nozzle use method: Press the brush head lock button,
at the same time pull out or back to corresponding position until
heard a click, it means the brush head is locked. Two use mode
conversion very easy.
• Nozzle down to an angle of 30 degrees. The nozzle should touch
the surface to be cleaned. Don't tilt the device to one side.
Caution: Do not collect liquids. This device is not used to vacuum
liquid.
• Empty the dust container every time after use.
CLEANING
• Make sure you regularly empty the dust container and clean
the filter
• Keep the device over a bin and turn it counterclockwise of the
dust container.
• Remove the filter holder from the dust container and beat them
clean.
• If the filter is very dirty you can clean with a brush, a vacuum
cleaner, or rinse with lukewarm water. Do not operate the
appliance until the filters have dried.
• Never immerse the device under water.
KVC-4085 User Manual
Example USB Power Sources
5
9
8
10
Publicité
