Télécharger Imprimer la page

Kiwi Baby KBABY-18 Mode D'emploi page 5

Aspirateur nasal automatique

Publicité

PARTS DESCRIPTION
1. Silicone 2mm aspirator tip
2. Silicone 3mm aspirator tip
3. Collection tank
4. Suction level indicator
5. Power / mode button
6. Start / stop button
7. USB input
8. Motor unit
9. USB cable
Caution:
Do not use power supply
above 5V 2A. Your device
will be damaged and out
of warranty.
USING THE APPLIANCE
Long press the power/mode button to turn on, and then press again to select the appropriate
level of suction. 1.When the first level of suction is selected, one light will be displayed. 2.Press
power/mode button to enter the second level of suction, and two lights will be displayed.
3.Press power/mode button again to enter the third level of suction, and three lights will be
displayed.
Keep the baby/child upright and insert the aspirator tip into the nostril a seal forms against the
nostril. Be careful not to insert the aspirator tip too far into the nostril and do not press against
the inner wall of the nostril.
Press and hold the start-stop button to suck and remove mucus. Only aspirate for a few
seconds at a time in affected nostril/s, and then repeat as needed.
Tips:
If necessary, block the opposite nostril for more effective suction. Opening the baby's mouth
can help relieve ear pressure discomfort. Note: Mucus may not appear in the collection cap
immediately, After each use, we recommend that you quickiy clean the used aspirator tip by
removing it from the device and thoroughly rinsing it under a warm tap.
When the mucus is thicker and firmer, using the larger aspirator tip (3mm) is recommended;
when the mucus is loose, liquid or with open nostrils, using the narrower aspirator tip (2mm)
is recommended. Ensure that the aspirator tip is firmly inserted into the collection cap before
use.
CLEANING AND DISINFECTION
Gently pull the aspirator tip off. Unscrew the collection cap. Clean aspirator tip and collection
cap (except motor unit) in warm water with some mild washing-up liquid. The aspirator tips
and collection cap are suitable for dishwashers. Before reassembly, allow all parts to air dry
thoroughly.
Note: Wipe the motor unit with a clean, damp cloth. Do not immerse the motor unit in water.
KBABY-18 User Manual
2
1
3
4
5
6
7
5
8
9

Publicité

loading