Publicité
Les langues disponibles
Les langues disponibles
Installation (continued)
FINAL INSPECTION
- Open your home's hot and cold water
supply valves and carefully inspect all
connections for leaks .
- Move the valve handle (13) to the open
mixed position by turning it to the middle
and pulling it away from the faucet .
- Run the water uninterrupted for about one
minute to remove any residue from the
lines and inspect all connections for leaks
once again .
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance.
7
Valve Handle (13)
Fig. 6
CONGLOMKB.COM
Publicité
