essentiel b MS-E-200-D Notice D'utilisation page 21

playing an audio CD
Your mini-stereo can play audio CDs as well as MP3s recorded on CD-R or CD-RW.
Turn on the player using the button on the appliance or the remote control. Select the DISC
1.
source by repeatedly pressing the
the remote control.
Press to open the disc compartment, then insert a disc (label side up).
2.
Close the compartment. The appliance loads the disc, and displays information about the
3.
CD contents, such as the total time and number of tracks, on the screen. Playback then starts
automatically.
For CDs containing audio files in MP3 format, the mini-stereo starts playback with the first track of
4.
the first album in alphabetical order. To go directly to another track, press briefly on the
buttons.
Basic functions
Starts, pauses or resumes playback.
Stops playback.
Accesses the previous track.
Press and hold to play backwards at an accelerated speed.
Accesses the next track.
Press and hold to play forwards at an accelerated speed.
INTRO Plays the first 10 seconds of each track.
SHUFFLE Random disc playback.
ALBUM- /
In MP3 playback, allows access to the next or previous folder.
ALBUM+
Repeat
When playing an audio CD, you can select a repeat option. Press the REPEAT button to repeat a
•
track, a second time to repeat the entire disc, and a third time to disable repeat. The repeat symbol is
displayed on the top right of the screen.
When playing MP3 audio files, press the REPEAT button to repeat a track, a second time to repeat an
•
album, a third time to repeat the entire disc, and a fourth time to turn repeat off.
Programming a playlist
When the mini-stereo is stopped, press the PROG button, then select the desired track number using
•
the and buttons. Then press PROG again and select another track number.
40
V.1.0
playing an audio CD
button on the mini-stereo or by pressing the CD button on
Repeat as often as necessary (20 tracks maximum). Then press
•
is in the order you have defined. Use the
programming.
Press the button twice to cancel the programming.
•
listen to FM radio
Connect the antenna cable supplied to the back of the mini-stereo, and extend it fully.
1.
Turn on the mini-stereo, and select the FM source by repeatedly pressing the
2.
mini-stereo or the remote control.
or
Performing a full scan on the FM band
When the appliance is turned on, press and hold the SCAN button on the remote control or the
1.
button on the mini-stereo for 3 seconds to perform a full scan on the FM band. The first thirty stations
found are stored.
To stop the search, press the SCAN button again.
2.
Search for a radio station automatically
Press and hold the
1.
FM scanning stops when a radio station has been found.
2.
You can then briefly press the
3.
as described in the next paragraph.
Search for a radio station manually
Briefly press the
1.
frequency is reached.
Each time the or
2.
If reception is poor, adjust the FM antenna position or change the frequency.
3.
Store radio stations automatically
When the mini-stereo is turned on, set it to the FM station of your choice.
1.
Press and hold the PROG button. Memory number 01 flashes on the display. Use the
2.
buttons to select the desired memory number. Press
MEMORISEE (stored) appears on the screen.
Repeat as often as necessary.
3.
to start playback. Playback
and buttons to navigate through your
or buttons for 2 seconds to perform an automatic scan.
or buttons on the remote control to refine your search,
or buttons on the remote control until the optimal reception
keys are pressed, the frequency decreases/increases by 0.05 MHz.
to confirm FM station programming.
button on the
or
41
V.1.0
listen to FM radio