SNAPSHOT BUTTON
The circular button on VIDEO 2 GO can be used to capture an image of the current frame of your video. This is
useful for using as a thumbnail/screenshot when posting your video online. Follow the steps below to use the
SNAPSHOT BUTTON with the appropriate software:
PowerDirector (PC)
1.
Open PowerDirector.
2.
Click "Capture From TV Signal" (the TV-with-antenna icon, third from the left).
3.
When you see the frame you want to capture, click the SNAPSHOT BUTTON on VIDEO 2 GO.
4.
A window will appear where you can enter the file name of the image. After doing this, click "OK."
You should now see the image with the name you entered in the pane on the right.
5.
Repeat Steps 2-4 anytime you want to capture a snapshot of your video. (You can do this as many
times as you want for any video.)
VideoGlide (Mac)
1.
Open VideoGlide Capture.
2.
When you see the frame you want to capture, click the SNAPSHOT BUTTON on VIDEO 2 GO.
3.
A window will appear where you can enter the file name of the image. You can also click the drop-
down menu to select where on your computer you want to save the snapshot. After doing this, click
"OK."
4.
Repeat Steps 2-3 anytime you want to capture a snapshot of your video. (You can do this as many
times as you want for any video.)
Note: By default, the images will be captures as .pct files. To select a different picture format (e.g.,
JPEG, BMP, PNG, etc.), click the "Snapshot" menu at the top of the screen then select "Snapshot
Settings..." Click the "Destination Format" drop-down menu to select the format you want.
10