Midea MRU17F6AWW Mode D'emploi page 10

LEVEL FREEZER
IMPORTANT: Level the freezer for proper operation and to avoid cooling,
frost and moisture problems that can occur when the door does not close
properly.
1.
Move the freezer to its final location. See "Move to Final Location."
2.
Place a carpenter's level on the top of the freezer cabinet.
3.
Adjust the two leveling feet, (one foot located at each of the two front
corners of the freezer cabinet) until the freezer is level.
NOTE: The leveling feet are easier to adjust if you have someone push
against the top front of the freezer to take some weight off the feet.
To Raise - Turn the leveling feet clockwise
To Lower - Turn the leveling feet counterclockwise.
BEFORE USE
WAITING PERIOD
•
Before plugging the freezer into a grounded 3-prong electrical outlet,
allow it to stand upright for approximately 2 hours.
NOTE: This reduces the possibility of a malfunction in the cooling
system from improper handling during transportation.
CLEANING
1.
Wash the freezer interior using a soft cloth dampened with a baking
soda solution (2 tablespoons baking soda mixed with 1 quart of warm
water).
2.
Using a soft cloth, thoroughly dry all surfaces.
10