Publicité
Les langues disponibles
Les langues disponibles
Maintaining your appliance
Unlocked position
Unlocked position
3.
Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4.
Push the hinge locks up against the front frame of the oven cavity to the
locked position.
5.
Close the oven door.
52 English
Removing and reinstalling the storage drawer
Hinge lock
Hinge lock
Locked position
Locked position
1.
Slide open the drawer until it stops.
2.
Locate the roller guide clips on either
side. Using both hands, pull down the
left clip while lifting the right clip, and
then remove the drawer.
3.
Clean the drawer in warm, soapy water
using a cloth or soft brush. Then, rinse
and dry it thoroughly.
4.
Put the drawer in the roller guides on
either side, and then snap the clips into
place.
Publicité
