Publicité
Les langues disponibles
Les langues disponibles
Operation
Remove/replace the stand
The stand is connected to the camera by a magnet.
If you want to remove the stand to hang the camera
on the wall or replace the SD card, simply pull the
stand off of the camera. To replace, just snap it back
on the camera.
Honeywell Home app experience
When you launch the application, your Home screen
is displayed.
All of your devices (cameras, thermostats, water leak
detectors, etc.) are displayed. Select a camera from
the list to view live video from that camera.
Testing smoke/CO alarm detection
If your smoke or carbon monoxide alarm goes off
and your camera is on, it will send you an alert that a
smoke or CO alarm has been detected.
To test this feature, press and hold the Test button
on your smoke/CO detector for at least 5 seconds or
3 cycles of the detector's alarm. A shorter test might
not trigger a sound event.
For a list of compatible alarms see
Honeywellhome.com.
5
Publicité
