Perel SMART1002 Mode D'emploi page 4

5. Plug the smart socket into an electrical
outlet and unplug. Repeat within an
interval of 3 seconds. Finally, plug the
smart socket into the electrical outlet
without unplugging.
7. Check whether the connect Wi-Fi name and password are correct.
Click Confirm. The smart socket will automatically connect to the
network indicating that the device is added successfully. Modify
the device name and select in which room the smart socket is
being used.
4.3 Resetting
1. Click the pen symbol in
the upper right corner.
V. 02 – 25/06/2021
SMART1002/SMART1004
6. The Wi-Fi link starts blinking. Click
2. Click Remove Device.
4
Confirm.
8. You can now
3. Click Disconnect.
control the smart
socket through
your mobile
device.
©Velleman nv