Glacier bay HD874X-1004 Guide D'installation Et D'entretien page 13

Installation (continued)
10
Adjusting the temperature
D
Reinstalling the inverter and
sleeve
NOTE: Rotate the cartridge stem (1) clockwise to turn off
the water before you install the handle.
□
Place the inverter (2) onto the valve body (D)
and rotate the inverter (2) with notch facing
down.
□
Screw the sleeve (4) onto the valve body (D).
11
Installing the escutcheon
and handle
□
Install the escutcheon (E) onto the valve body
(D) using the escutcheon screws (M). Place
the handle assembly (F) onto the valve body (D),
and secure it with the screw (G).
□
Use a Phillips screwdriver to tighten the
escutcheon screws (M) and the screw (G).
□
Insert the index (H) into the handle (F).
F
G
H
2
3
E
M
13
Please contact 1-855-HD-GLACIER for further assistance.
D
1
D
HOMEDEPOT.COM