Publicité
SETTING THE CLOCK
mm
a
1 Connect the AC power cord to a wall outlet (@).
The clock display begins flashing.
2 Keeping
CLOCK down,
press HOUR to set the hour and
press MIN to set the minute.
12:00
midnight
12:000 noon
BACKUP FUNCTION
If the AC power supply is interrupted,
the clock display goes
off and the alarm setting is canceled.
To back up the clock
and alarm, insert a 6F22 battery in the battery compartment
on
the rear of the unit. + @
The backup function lasts about 10 minutes.
The backup battery is not for radio reception.
Replacing the battery
Replace the battery with new one if the clock display flashes or
the alarm timer does not work properly when you connect the
AC power cord again.
Note on battery
When you are not going to use the unit for a long period of
time,
remove
the battery
to prevent
possible
electrolyte
leakage.
To prevent
the risk of electrolyte
leakage
or explosions,
never recharge the battery, apply heat to it, or take it apart.
Publicité
