Fichet-Bauche NECTRA Serie Mode D'emploi page 42

3.5.3 Setting the duress alarm procedure delay
The delay timer can be set from "0" to "99" minutes.
C
Type in the master code +
C
When the green light is displayed, open the door.
C
Door opened, type in master code again +
C
Type "15" +
C
Type "delay duration in minutes" +
If the 2 codes release mode (4 eyes mode) is activated, the duress delay can only
be activated by the second operator (second code dialled).
Nectra
Duress alarm
42
Orange light Green light
X2
X2