Publicité
Les langues disponibles
Les langues disponibles
Baby bottle warmer
Dear Customer,
Before using the appliance, the user must
read the following instructions carefully.
Connection to the mains supply
Th e appliance should only be connected to
an earthed socket installed in accordance
with the regulations. Make sure that the
supply voltage corresponds with the voltage
marked on the rating label of the appliance.
Th is product complies with all binding CE
labelling directives.
Familiarisation
1.
Rating label
2.
Housing
3.
Warming container
4.
Lift -out holder (for jars)
5.
Temperature control knob
6.
Indicator lamp
Important safety instructions
Th is appliance is not intended for use by
any persons (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning
the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Before the appliance is used, the main
body as well as any attachments fi tted
should be checked thoroughly for any
defects. If the appliance, for instance, has
been dropped onto a hard surface, it must
no longer be used: even invisible damage
may have adverse eff ects on its operational
safety.
Th e power cord should be regularly
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not allow the bottle warmer to operate
without supervision.
Caution: Th e warming container reaches
high temperatures during operation.
Th e appliance is to be used only for
warming up bottles or glass jars containing
baby food. Do not put baby food directly
into the warming container.
Baby food should only be heated
immediately prior to feeding time,
and should be given to the infant
immediately aft erwards. Once warmed
up, the food should not be left too long
time in the container.
Do not allow the housing or the power
cord to come into contact with open fl ames
or any hot surface such as hotplates.
Always remove the plug from the wall
socket
-
aft er use, and also
-
in case of any malfunction,
-
before cleaning the appliance.
When removing the plug from the wall
socket, never pull on the power cord. Do
not let the power cord hang free.
Do not allow the power cord to come
into contact with any hot parts of the
appliance.
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualifi ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer
service
address can be found in the appendix to
this manual.
Th is appliance is intended for domestic or
similar applications, such as in
-
staff
kitchens,
commercial environments,
-
agricultural areas,
-
hotels,
motels
establishments,
-
bed-and-breakfast guest houses.
Before using for the fi rst time
–
Before the bottle warmer is used for the
fi rst time, it must be thoroughly cleaned
as described in the section General Care
and Cleaning.
7
departments.
Th e
offi ces
and
other
etc.
and
similar
Publicité
