Whispbar K491W Instructions De Montage page 8

EN
Fitting Kit
K491W
NOTE: Only use clamp 629A for Audi Q5
front left position.
Ensure the two pins of the clamp engages
correctly with the holes in the roof rail.
Place one hand on the leg and apply
downward pressure.
Slide clamp through opening in leg.
Thread the coach bolt through the clamp
and the leg.
Tighten the plastic knob.
Ensure the plastic knob is in the position
shown when fully tightened.
Do not over tighten.
Repeat for all four positions.
Ensure the clamp engages correctly on
inside of roof rail.
8