Beper RI.062 Manuel D'instructions page 11

Les langues disponibles

All manuals and user guides at all-guides.com

Digital fan heater Use instructions

USAGE:

1. Please make sure the capacity should be AC220-240V, 50Hz.

2. Put the plug in the wall socket.

3. Please operate the machine according the control keys on the control panel or the remote con-

trol. (you can see the control panel and remote control in this paper)

Turn on the power switch, LED display Environment temperature ("POWER" light on); see picture 1

1 All function need to be operated by remote control or pushing the switch in fi gure 2.1 up to select

the desired function

2. Fan keep working for 30 seconds when shutdown the appliance (after heating).

NOTE: The indicator lights when corresponding function is working.

2.1

REMOTE CONTROL

3. Press "On/off" as follows: ON(Fan working, FAN light on),

OFF(Fan keep working for 30 seconds when shutdown the

appliance after heating), see picture 5.1

4. Press "Heating" as follows: Low heat (LOW light on), High

heat (HIGH light on), FAN working. see picture 6.1-6.2

5. Press "SWING" as follows:, SWING ON (SWING light on),

SWING OFF, see picture 7.1.

6 Press "TIMER" to set timer as follows: 1H,2H,3H.....8H(TIMER

light on), see picture 8.1-8.4

7Press "+" "-" to set temperature, Temperature range: 18-45°.

see picture 9.1-9.2

8.Press "Cancel" to cancel temperature setting.

9.For example, Environment temperature is 26 °, See picture

11.1

Press "-", Set temperature is equal to or lower than Envi-

ronment temperature, appliance will stop heating. See picture

11.2-11.3

Press "+", Set temperature is 1° higher than Environment tem-

perature, appliance will stop heating. See picture 11.4

Set temperature is higher or equal to Environment temperatu-

re+2°, appliance will start heating. See picture 11.5

NOTE: When set temperature on low heat, after cancel, re-

When set temperature on low heat, after cancel, re-

turn to low heat.