Publicité
1
Fix the fixture to the unit using 2 fixing screws
3
Disengage adapter plate by loosening screw.
5
Fixture White
wire
Pull 3 wires out of the fixture to allow connection to
the branch circuit.
Inserting wires into the open hole in the push-in
wire connector
7
Feed wires back into fixture, reattach adapter
plate tighten screw, and attach the fixture to the
base of the cabinet, with screws
Fixture Black
wire
Fixture Green
Ground wire
2
Remove the kock-out by hammering
4
Insert romex connector into the housing open hole
on the adapter plate. Secure it with the nut.
6
Connect the Green ground input supply wire to the
fixture Green ground wire.
Connect the White input supply wire to the fixture
White wire.
Connect the Black input supply wire to the fixture
Black wire.
**Do not mix wires or change polarity.
Page 4 of (5)
Publicité
