Publicité
SLIDING DOOR HARDWARE -
MINI CARRIER KITS TOP MOUNT
1
MOUNT RAIL
• Rail is designed to be secured on 16" centers or less.
• Lay out the location of the rail on the cabinet/wall.
88mm
NOTE: The rail must be level in order for the door to stay level.
2
SECURE RAIL
• Holes are predrilled in the rail.
• Place stop on rail near end of travel prior to mounting rail.
• Mount rail to header using mounting plates and provided
bolts (H).
88mm
50mm
Ø5.5
3
MOUNT CARRIERS
• Using a square, locate carrier location and mark mounting
holes using the carriers as a template.
NOTE: Carriers must be square to door to prevent premature
wear on carriers.
• Drill holes through door using a 25/64" (10mm) drill bit. Drill
Guide is recommended
• Mount carriers to door using provided screws.
#N310619 (0318)
Assembly
Instructions
Publicité
